讯海轴承/SKF/深沟球轴承/6005-2ZNR

SKF 6005-2ZNR 深沟球轴承 25×47×12 mm斯凯孚 · 瑞典

深沟球轴承 · 主要尺寸 25×47×12 mm

SKF 6005-2ZNR 深沟球轴承

关键尺寸

25内径 d / mm
47外径 D / mm
12宽度 B / mm

资料下载

SKF 6005-2ZNR 技术参数

尺寸
SKF 6005-2ZNR 尺寸示意图
孔径25 mm
外径47 mm
宽度12 mm
孔径25 mm
中间孔径的偏差限值[-0.008, 0] mm
外径47 mm
中间外径的偏差限值[-0.009, 0] mm
宽度12 mm
环宽的偏差限值[-0.06, 0] mm
挡边直径32 mm
凹槽直径42.2 mm
止动槽直径44.6 mm
止动环外径52.7 mm
止动环槽宽度1.35 mm
外圈侧面到止动槽间的距离2.06 mm
止动环宽度1.12 mm
止动槽底部半径0.4 mm
倒角尺寸0.6 mm
尺寸的 ISO 公差等级P6 及更紧的宽度公差
性能
基本额定动荷11.9 kN
基本额定静负荷6.55 kN
参考转速32000 r/min
极限转速16000 r/min
SKF 性能等级SKF Explorer
属性
注油槽不带
列数1
定位特征,轴承外圈止动环(已安装)
孔类型圆柱孔
保持架冲压钢
配对布置无
径向游隙CN
材料,轴承轴承钢
涂层不带
密封两侧带防尘盖
密封类型非接触
润滑剂润滑脂
补充润滑功能不带
新产品的指示性碳足迹0.3 kg CO<sub>2</sub>e
挡肩尺寸
SKF 6005-2ZNR 挡肩尺寸示意图
轴挡肩直径28.2 mm
轴承座挡肩直径43.8 mm
轴承座内的止动槽直径54 mm
轴承座内的止动槽宽度1.5 mm
外圈侧面到止动槽背面之间的距离3.18 mm
轴或轴承座倒角半径0.6 mm
数据计算
SKF 性能等级SKF Explorer
基本额定动荷11.9 kN
基本额定静负荷6.55 kN
疲劳载荷限值0.275 kN
参考转速32000 r/min
极限转速16000 r/min
最小载荷系数0.025
计算系数14.3
跳动公差
装配后轴承内圈截面高度范围4 µm
内圈侧面相对于孔的最大跳动8 µm
装配后轴承内圈的最大轴向跳动8 µm
装配后轴承外圈截面高度范围7 µm
外圈外表面的垂直度4 µm
装配后轴承外圈的最大轴向跳动8 µm
几何公差的 ISO 公差等级P5
包含的产品
止动环SP 47

产品说明

Single row deep groove ball bearing, with snap ring groove and seals or shields on one or both sides, are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The snap ring, fitted in an annular groove in the outer ring, facilitates axial location of the bearings within their housings. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

尺寸图纸

SKF 6005-2ZNR 尺寸图纸

点击图纸可放大查看,再次点击关闭。

同尺寸其他型号

以下型号与 SKF 6005-2ZNR 的主要尺寸相同(d 25 × D 47 × B 12 mm),可用于同尺寸替代选型。

同系列相近型号